Philips FC8802 Manual Del Usuario página 12

ENGLISH
12
11
drop-off sensors in the bottom of the robot. To maintain good cleaning performance, you have to
clean the suction opening, the wheels and the drop-off sensors from time to time.
1
2
3
opening (Fig. 26).
4
5
Note: It is important that you clean the drop-off sensors regularly. If the drop-off sensors are dirty, the
robot may fail to detect height differences.
To ensure proper functioning, clean the side brushes and the shafts from time to time.
1
2
3
4
5
6 Push the side brush back onto the shaft (Fig. 31).
7 Repeat steps 2 to 5 for the other shaft and the other side brush.
Storage
1
2
3
4
Note: After a long period of storage, always charge the robot before you switch it on.
Replacement
1