Bluetooth Operation - EGAmaster 66266 Manual De Instrucciones

Only bluetooth form products can use this function.
When using, please try not to apply too many other software at the same time to avoid the
stumble system operation and affect the data transmission.
1. Matching: When the measuring tool matches with the receiving device with bluetooth for the
first time use, both shall be matched for operation, turn on the bluetooth searching function
of receiving device (computer, phone),at the same time, long-press DATA button on the
measuring tool for more than 3 seconds,till
the measuring tool enters in the searched mode, loosen DATA button, wait till the receiving
equipment searches the Bluetooth Keyboard device, then click to connect, and wait for
the connection between the measuring tool and device.After connecting,
the screen all the time. If it can not be connected within 5 minutes,
measuring tool will exit the searched mode automatically.If continuing connection, please
repeat the above actions.
2. Send data: After connecting, short-press DATA button, data can be sent to the receiving
device (computer, phone), the screen will winkle
been sent. When the measuring tool and receiving device match and connect, please try to
keep the closest distance to avoid the bluetooth from disturbance and interruption, when the
measuring tool doesn't send data for more than 15 minutes, the bluetooth will be turned off
automatically to save power.
3. Caution: If one measuring tool matches and connects with several receiving device, the
device which is connected recently has the priority of connection. Because of the receiving
device system difference, after one measuring tool matches and connects with one receiving
device, when connecting with Windows computer, it can not be connected by long-pressing
DATA button of measuring tool for the reconnection directly, it's needed to delete Bluetooth
Keyboard shown on the computer, and match again to connect.

3. BLUETOOTH OPERATION

on the screen twinkles slowly,it means that
will disappear, the
at the same time, to remind that data has
will display on
7