Switching Between Front And Rear Serviceability - Chauvet Professional F4 Manual Del Usuario

F4 Panel Configuration
Switching Between
Front and Rear
Serviceability
The F4 should be front
serviceable for applications
such as mounting against a
flat wall, where there can be
no access to the rear of the
video assembly.
The F4 can be rear
serviceable in any application
where the rear of the video
assembly will be easier to
access than the front.
24
The F4 service module can be accessed and removed from either the front of the panel
or the rear of the panel, depending on how the user has configured the panel. Follow the
instructions below to switch the F4 from front serviceability to rear serviceability:
1. Remove the modules as described in
2. Remove six screws from the front of the service module.
Use caution when removing these screws, as the service module will be detached
from the panel frame until the next step is completed.
LED Module Care and Replacement.
Service
Module
F4 User Manual, Rev. 2