Typical F4 Installation; Step 1; Step 2; Step 3 - Chauvet Professional F4 Manual Del Usuario

Typical F4 Installation

9. Typical F4 Installation
Because a video wall system can include different components to provide a simple to complex modular wall design, use
the following steps as a general guide to get started.

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Step 8

26
Open and examine the F4 road case to make sure you have received all products and
accessories and that each one is in good condition.
Apply power and run the self-test for each F4 to ensure all LEDs and inside connections in
each panel are working (optional).
Create a stable mounting surface (e.g., truss or other stable surface) for F4 mounting.
Mount the first top row of the F4s. Refer to the
Adjust the alignment of the first row using the Speego connectors.
Connect the signal source to the VIP Drive 43Nova.
Connect the VIP Drive 43Nova to the Signal port of the first panel in your connection chain.
Based on your video wall configuration (design), join each panel, either horizontally or
vertically, using the instructions in the section
Refer to the instructions and information in the section of this User Manual,
(Cabling) Each F4.
Mounting section in this User Manual.
Joining Each F4 (Creating a Modular Design)).
Connecting
F4 User Manual, Rev. 2