CABLE MANAGEMENT
When installing equipment, either on the worksurface or below, be sure that the
connecting cables are free from obstruction.
WORKSTATION DESIGN TIPS
• Ensure that power cords for all accessory items – computer, lights, monitors,
etc. – are of sufficient length to reach outlets throughout the range of
worksurface height adjustment. Do not subject the cords to any strain while
height adjustment is taking place.
• Always check for proper operating clearance before placing any item on,
above or below the worksurface.
MAINTENANCE AND CLEANING
• Regularly clean dust and dirt from lifting columns. To ensure all surfaces are
thoroughly cleaned, make sure the lifting columns are fully extended to their
maximum height.
• Be sure to inspect cables and lifting columns for damage.
• Check all connections for both correct function and secure mounting.
A damp cloth is recommended. To protect the painted surfaces, use a
Note:
cleanser that is not highly alkaline or acidic. A pH-neutral product is ideal.
Note:
Please do not move the desk without help. Refer to the guidelines at the
end of the assembly instructions, or contact your facilities group for assistance.