F4 Ip Led Module Removal With Mt-01 - Chauvet Professional F4IP Manual Del Usuario

LED Module Care and Replacement

F4 IP LED Module Removal with MT-01

1. Identify the module that needs to be removed.
2. Carefully place the MT-01 against the module in the open position (with the knob turned
clockwise), then turn the knob counter-clockwise until the magnet is 1 mm away from the module.
Damage may occur if the MT-01 is not in the open position (knob turned clockwise)
when placed against the module.
F4 IP User Manual Rev. 1
Attach to the
area near the
Service Module
22