Dab Radio Mode - Lenco MC-175SI Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Snooze
1.
Whenever the alarm (alarm 1, alarm 2) comes on, it can be temporarily suspended for a short period
of approximately 9 minutes, by pressing the "SNOOZE" key once.
2. The alarm (alarm 1, alarm 2) will then automatically sound again after approximately 9 minutes have
passed.
3. The "Zz" symbol will show on the display to remind that the snooze function is active.
4. To deactivate the snooze, press and release the "POWER" key.
Sleep Timer
1. Repeatedly press the SLEEP button, you can choose between 90/80/70/60/50/40/30/20/10 minutes.
After this time, the unit will go to standby mode. This is useful for falling asleep to music at night.
2. If you want to cancel the sleep mode, repeatedly press SLEEP until OFF appears on the display
Display Backlight
You can press the DIMMER button adjust the display backlight brightness, there are 3 options
available, High, Medium and Low.

DAB Radio mode

Carefully extend the telescopic antenna.
Press the POWER button to turn on the unit, press the SOURCE button to select to DAB mode, it will
start up into DAB mode.
Auto Scan
1. If this is the first time the unit has entered DAB Mode, it will automatically start an 'Auto Scan' to
search for available stations. (Once DAB Mode has been used before, the unit will automatically
select the previously played station)
2. Hold the ENTER button to automatically start auto scan to search for available stations. During
the scanning process, the lower line of the display shows a bar graph indicating the progress of
the scan.
Manual Scan
1. Press the MENU key on main unit to enter the menu.
2. Press the [
menu.
3. Press [
] or [
if you press [ENTER]
4. Press [MENU] or [
5. If no stations are found, please ensure the aerial is extended and test the reception by doing
another auto scan in a different location.
] button to select "Manual tune", press the [ENTER] button to the service
] or [
] enter to tune in the desired channel. A graph will indicate the signal strength
] to exit scan.
11

Publicidad

Tabla de contenido
loading

Tabla de contenido