Sleep Function; Cleaning The Dust Fi Lter; Emptying The Water Tank - EQUATION AC-1 Manual De Instrucciones

5 - When the set time has elapsed, the air conditioner will turn on with the settings.
• Switch off the appliance with the timer
1 - Switch on the appliance, choose the operating mode (Cool, Dry, Fan) and adjust the setpoint temperature and fan speed
FR
TIMER
2 - Press the
3 - Set the time until the desired stop time using the
ES
4 - When the set time has elapsed, the air conditioner will turn off automatically.

Sleep function

The Sleep function can be used in Cooling or Dehumidifi er mode. This function provides a more comfortable environment for
PT
sleeping.
1 - Switch on the appliance, choose the operating mode (Cool, Dry) and adjust the setpoint temperature and the fan speed
SLEEP
IT
2 - Press the
3 - The function is automatically deactivated after 8 hours of operation and returns to the previously set mode.
EL
CARE
PL
Cleaning the dust fi lter
It is advisable to clean the dust fi lter every 250 hours of use to promote proper air circulation and optimum performance of the
air conditioner.
UA
RO
EN
The fi lter cleaning
indicator lights up
after 250 hours
of use
Cleaning of exterior parts
Use a soft, dry cloth. For strong stains, use a cloth dampened with soapy water and wipe immediately with a
dry cloth.

Emptying the water tank

In cooling mode, the internal water tank must be emptied regularly. If the display shows "P1", the tank must be
emptied.
Switch off the device and
unscrew the lower cap
46
button on the remote control
button on the remote control to activate the Sleep function.
Open the rear of the device
and remove the fi lter
Bring the device above a
container and remove the
rubber cap
and buttons (in number of hours)
Remove dust from the For strong stains, use
fi lter using a vacuum soapy water and dry
cleaner before replacing the
fi lter.
When the tank is empty,
replace the rubber cap
Press the
button to reset
the counter.
Screw the cap back on and
restart the appliance.