Makita VC001GL Manual De Instrucciones página 15

Adjusting lengths of slide-type
extension wand
Optional accessory
A slide-type extension wand can be combined for
shorter and longer lengths. It allows to clean hard-to-
reach areas and comfortable positioning options.
Pull in and out the slide pipe to change wand lengths
while pressing and holding the slide button.
Release the slide button to lock the slide pipe in your
desired position.
Fig.29
► 1. Slide pipe 2. Slide button
MAINTENANCE
CAUTION:
Always be sure that the appliance
is switched off and the battery cartridges are
removed before attempting to perform inspection
or maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
2
1
Storage of accessories
Accessories and attachments not in use, such as noz-
zles and brushes, can be hooked and stored in the multi
hook at the rear of the cleaner.
2
Fig.30
► 1. Multi hook 2. Accessories and attachments not in use
Pipes (with an optional stopper installed) can be placed into
the pipe holder when not using the cleaner for a short time.
2
Fig.31
► 1. Stopper (optional accessory) 2. Pipe holder
A hose can be wrapped and stored around the housing or han-
dle of the cleaner in large loops. Connect its both ends together
to make loops and hook the loops onto the handle raised up.
Alternatively, keep its root end installed in the hose inlet and
hang the loops on the multi hook with the loose end tied up.
Fig.32
15 ENGLISH
2
1
1