Blade Sharpening; Checking The Oil Level; Periodic Maintenance; Air Filter - Garland TEXEL 389 QG Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1

8.1.2. BLADE SHARPENING

Blade sharpening should be done in an authorized
after sales. Do not sharpen the blade by yourself. The
blade must be sharpened guaranteeing the correct
angle and equilibrium of the blade. Sharpening if not
an expert can cause excessive vibrations that could
cause damages to the machine and will make the use
of the machine very uncomfortable to the end user.
Be careful when checking the state of the blade,
remember that although the engine has stopped the
blades can be moved manually.

8.1.3. CHECKING THE OIL LEVEL

- Place the machine on a horizontal, uncluttered flat
surface.
- Unscrew the oil filler cap.
- Clean the oil cap dipstick with a cloth.
- Insert the dipstick and screw on the oil cap.
- Unscrew the plug again and check the mark left by
the oil on the dipstick. The mark left by the oil must
be between the minimum and maximum marks.
- If the mark is below the minimum add a little more
oil and recheck.
- If the mark is above the maximum you will have
to remove oil from the crankcase. To do this, tilt
the machine and let out a little oil (put a container
at the end of the tube to prevent oil spilling from
the machine or onto the ground).

8.2. PERIODIC MAINTENANCE

Make periodic inspections of the machine to ensure
that the machine is correct.
For a thorough inspection take the machine to your
dealer.
Use only suitable spares to get a proper performance
for this machine. This replacement can be found on
the official distributor of the machine. Using other
sparks may causes risks, damage to the user or
people around the machine.
Carry out maintenance work based on the following
table:
Operation

Air filter

Petrol filter
Spark plug
Cylinder fins
To grease the
Gearbox
Change the
engine oil
Check the oil
level
8.2.1. AIR FILTER
The dirt in air filter will cause a reduction in machine
performance.
45/148
Each 2
Each 10
Once a
petrol
petrol
year
deposits
deposits
English

Publicidad

Tabla de contenido
loading

Tabla de contenido