Fcc Caution - Srhythm NiceComfort 85 Manual Del Usuario

8. Q: What do I do if Bluetooth can not close or open?
A: Please reset Bluetooth function of headphone by
inserting an audio cable into headphone
audio port,then removing it.Before re-connecting,kindly
remember to delete/ignore headphone Bluetooth
pairing name "Srhythm NC85" on your mobile phone.
9. Q: Why does Bluetooth turn off when I connect an
audio cable?
A: This is one of our special features. When users insert
an audio cable into headphone audio port, all Bluetooth
feature buttons stop working and Bluetooth turns off.
But,Bluetooth will be available again when audio cable is
moved.
10. Q: Why can't I turn headphone on/off?
A: Please note that ANC and Bluetooth are indicated by
the same LED indicator light(but different light color),
with a green light for ANC and a blue light for Bluetooth.
If you need to turn Bluetooth on/off,you can turn off ANC
firstly in case that you make confused by the color
lights.But you will be ver y familiar with the light color
meaning after using few times because it is simple and
easy.
11. Q: Why does audio quality become poor on
Windows PC?
A: Some customers have mentioned poor audio quality
on Windows PC.Please note that there are "Headset"
and "Headphone" modes you can toggle by changing
your output device.Selecting "Headphone Mode" will
drastically improve the audio quality."Headset Mode"
is designed for highly compressed VOIP calls,etc.That's
not the fault of headphone product,that's just the
limitation of that protocol.If you are in "Headphone
Mode",the audio quality is fantastic.
13

FCC Caution:

Any Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
IMPORTANT NOTE:
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to tr y to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician
for help.
14