UFESA CP6850 UNDERCUT Manual De Instrucciones página 23

REMOVING BATTERY
The appliance must be disconnec-
ted from the supply mains when re-
moving the battery.
The battery must be removed from
the appliance before it is scrapped.
The battery is to be disposed of sa-
fety.
Ensure the hair clipper is discharged of all power. Firstly, remove
the comb and after that remove the blade. Unscrew the 2 screws
in the blade base of the unit. Unscrew the other screw on the
lower back housing of the clipper. Lift or pry the clipper halves
apart, exposing the battery.
Cut the metal pieces on both ends of the battery and remove it
from the PCB.
Pull downward the battery set from the unit.
23