Positioning The Unit - ProBreeze PB-08-US Manual De Instrucciones

PARTS
1 5
1. Control Panel 6. Water Hose Connector
2. Water Tank 7. Air Outlet
3. Wheels 8. Power Connector
4. Air Inlet 9. Filter
5. Handle 10. Humidity Indicator Light
SPECIFICATION
Model: PB-08-US
Collection Capacity: 50 Pint (at 86°F, RH 80%)
Water Tank: 1.2 gallon
Voltage: 115V~
Frequency: 60Hz
Power: 400W Max
Product Dimensions: 22.8*12.6*7.87 Inch
Net Weight: 29.4 LB
Operating Range: 41~ 90°F
Refrigerant: R134a/ 190g
3 | English
10 7
9
4
6
2
8
3
CONTROLS
1. Water Tank Full
5. Timer Set
2. Defrost in Progress
6. Temperature Indicator
3. Fan Speed Low
7. Humidity Set
4. Fan Speed High

POSITIONING THE UNIT

• This unit is designed to operate in
temperatures between 41°F and 99°F,
and between a 30% and 80% RH (relative
humidity).
• Place the unit in an area where the
temperature will not fall below 41°F.
In temperatures below 41°F, the coils
may freeze; leading to a reduction in
performance.
• Place the unit on a smooth, level surface,
strong enough to support the unit with a
full water tank.
• Allow at least 30cm of space above the
air outlet (at the back of the unit) for good
air circulation. Allow at least 20cm of
space on all other sides of the unit for
good air circulation.
• Place the unit away from a clothes dryer,
heater or radiator.
• For best results, place the unit in an
enclosed space and close all doors
windows and outside openings.
• If placed near an enclosed storage area
(like a wardrobe or cupboard), ensure
there is adequate circulation of air.
• Do not use outdoors.
• This unit is intended for indoor residential
use only. It should not be used for
commercial or industrial applications.
• There are four wheels attached to the unit
for ease of transportation. Do not force
the castors to move over carpet.
• Do not transport the unit with water in
the water tank. This may cause the unit
to tip over or the water to spill.
English | 4