ProBreeze PB-08-US Manual De Instrucciones página 4

POSITIONING THE UNIT
Up: 30cm or more
Left: 20cm or more
Front: 10cm or more
Power Button
Turns the dehumidifier on and off.
Set %:
Sets the desired relative humidity (RH) between 30%-80% during normal dehumidification
mode. The '%' indicator light will flash when changes are being made. The dehumidifier will
turn off when the room reaches this target RH%.
To see the current room temperature press and hold the SET % button for 5 seconds until
the temperature indicator light is on (°F). Modify the temperature unit here
5 | English
Mode
Select between Normal, Low-power, High-
power and Laundry Modes
Back: 20cm or more
Speed
Right: 20cm or more
Sets the dehumidifier power to high or low
speed when in Normal Mode.
Timer
Set a turn-on or shut-off timer, between 1-24
hrs.
• Setting a Turn-On timer: When the
dehumidifier is off, tap the timer button
until you reach the desired number of
hours before you want it to turn on. The
'Hr' light will light up when a timer is set.
• Setting a Turn-Off timer: When the unit is
on, tap the timer button until you reach
the desired number of hours required
before it turns off. The 'Hr' light will light
up when a timer is set.
Child Lock
This button will lock the controls for child
safety. Press and hold the button for 3
seconds to lock and unlock.
Normal Mode: Allows manual setting
Fan
of both fan speed and target humidity
%.
Turns off the dehumidifying function so that
only the fan runs.
Low Power: Automatically sets the
Display
fan speed to low. Target humidity % is
disabled and the dehumidifier will run
continuously. Press this button to send the display to sleep.
The unit will continue working but the lights
will turn off.
High Power: Automatically sets the fan
Defrosting Light
speed to high. Target humidity % is
disabled and the dehumidifier will run
continuously. Indicates when the unit is defrosting.
Humidity Indicator Light
Laundry: For use in a laundry room
when drying clothes. Target humidity This is an indicator of the current air humidity:
% is disabled and the dehumidifier will
run continuously. •
•
•
REMOVING AND EMPTYING THE
WATER TANK
When the water tank is full the red indicator
light will flash and the product will make a
beeping sound. The dehumidifying function will
automatically stop. Press the ON/OFF button
to turn off the dehumidifier before removing
the water tank.
1.
2.
3.
Red: Humidity more the 70%
Green: Humidity between 50% -70%
Blue: Humidity below 50%
Gently pull the water tank out from the
back of the dehumidifier.
Use handle to empty the water tank.
Once empty, slot the tank back in
carefully.
English | 6