Lionelo Bastiaan Manual Del Usuario página 15

Ocultar thumbs Ver también para Bastiaan:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 61
2.
You will hear a distinctive click, which means the fastening is correct. On
both arms the indicator should be green (fig. 19).
3.
Take out the upper fastening belt of the safety seat and attach the hook in
one of three positions presented below. Tighten the belt and make sure it
has been properly mounted.
Assembly of the top belt TOPTETHER
Connecting the upper strap to the attachment points (fig. 20):
For most cars, the rear seat is mounted on the rear shelf at the rear window.
Fitting to the floor of the boot, which is behind the rear seats.
Fixing just under the seat of the vehicle, you have to put the seat to find the hook.
Fitting to the rear seats of the vehicle (fig. 21).
Using the upper strap greatly increases the clamping force. The mounting position
will vary depending on the vehicle.
GROUP I (9-18 kg)
For this group weight, the child seat is ISOFIX-facing with car belts or car belts only.
Before installing, read the vehicle's instruction manual.
Assembly instruction:
1.
Assemble the child seat using ISOFIX (fig. 22):
Press the ISOFIX button to extend the arms.
Put your shoulders in ISOFIX car holders. You hear a click of a button,
indicating a correct fixation. On both shoulders, the indicator should be green.
2.
Then use three-point car belts (fig. 23):
Fold the shoulder part of the belt between the headrest with the backrest.
Place the hip over the red guide.
Fasten the belt.
Push the seat and pull the car belt.
If you are installing in cars without ISOFIX, skip the first point.
GROUP II and III (15-36 kg) (fig. 22, 24)
For weight group 2 and 3 you must disassemble 5-point belts of the safety seat.
1.
Assemble the child seat using ISOFIX:
Press the ISOFIX button to extend the arms.
Put your shoulders in ISOFIX car holders. You hear a click of a button,
‑ 15 ‑
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido