Accessories And Spare Parts; Scope Of Delivery; Symbols On The Device; Hazard Levels - Kärcher PSU 4-18 Manual De Instrucciones

Accessories and spare parts

Only use original accessories and original spare parts.
They ensure that the appliance will run fault-free and
safely.
Information on accessories and spare parts can be
found at www.kaercher.com.

Scope of delivery

The scope of delivery for the appliance is shown on the
packaging. Check the contents for completeness when
unpacking. If any accessories are missing or in the
event of any shipping damage, please notify your deal-
er.

Symbols on the device

General warning symbol
Read the operating instructions and all
safety instructions before operating the
device for the first time.
Wear non-slip, sturdy gloves when work-
ing with the device.
Wear suitable eye protection when work-
ing with the device.
Wear non-slip safety shoes when work-
ing with the device.
Wear a mouth-nose mask when working
with the device.
Do not subject the device to rain or moist
conditions.

Hazard levels

DANGER
● Indication of an imminent threat of danger that will
lead to severe injuries or even death.
WARNING
● Indication of a potentially dangerous situation that
may lead to severe injuries or even death.
CAUTION
● Indication of a potentially dangerous situation that
may lead to minor injuries.
ATTENTION
● Indication of a potentially dangerous situation that
may lead to damage to property.

Safety information

General safety instructions
DANGER
● Risk of acid burns. Never point the
nozzle at a person or an animal. Never allow the jet to
come into direct contact with your skin. ● Danger of
10
burns. This device must not be used for spraying flam-
mable paints or solvents with a flash point < 21°C.
WARNING
the work area is adequately ventilated. ● Risk of acid
burns. Always hold the spray lance in position during
use. ● Danger of explosion. Never use the device in ar-
eas where there is a risk of fire or explosion. ● Risk of
injury. Pay attention to any danger from the fluid being
sprayed and consult the markings on the container or
the information supplied by the manufacturer. ● Do not
spray any fluid that you do not know is dangerous and/
or harmful.
General Power Tool Safety Instructions
WARNING
● Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the safety instructions refers to
your mains-operated (corded) power tool or battery-op-
erated (cordless) power tool.
1 Work safety
a Keep your work area clean and well-lit. Untidy
or unlit work areas can lead to accidents.
b Do not operate power tools in explosive at-
mospheres, such as in the presence of flam-
mable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c Keep children and bystanders away while op-
erating a power tool. Distractions can cause
you to lose control of the device.
2 Electrical safety
a Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
b Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
3 Personal safety
a Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or med-
ication. A moment of inattention while operating
power tools may result in serious personal injury.
b Use personal protective equipment and al-
ways wear safety goggles. Protective equip-
ment such as dust mask, non-skid safety shoes,
hard hat, or hearing protection used for appropri-
ate conditions will reduce the risk of personal in-
juries.
c Prevent unintentional starting. Ensure that
the power tool is switched off before connect-
ing the power supply and/or battery pack,
picking up or carrying the tool. Carrying power
tools with your finger on the switch or connecting
the power supply to a device that is already
switched on can lead to accidents.
d Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool
may result in personal injury.
e Do not overreach. Keep a firm footing and
maintain your balance at all times. This ena-
English
● When spraying, make sure that