Operating And Adjusting; Safety Instructions; Operation - Steelcase TouchDown2 Guía Rápida

4

Operating and adjusting

4.1 Safety instructions

The TouchDown2 desk should only be used and operated in
faultless condition and in compliance with the instructions in
the user guide.
Before changing the height of the desk, ensure that:
■
the desktop is horizontal. In case of uneven floors,
adjust the height using the adjusting screws on the
feet.
■
people or objects (e.g. open doors or windows) are
not in the lifting range, or do not protrude into the
lifting range.
■
no one is on the desk.
■
the maximum permissible load capacity of the desk is
not exceeded.

4.2 Operation

DANGER
Severe or fatal injury due to gas springs!
"The blockable gas springs used for TouchDown2 (Stabilus
4596 UM) are permanently pressurised and must never be
opened. Improper installation or improper replacement of the
gas pressure springs can result in severe or fatal injury."
}
Only specialists are allowed to work on gas springs!
}
Only remove and handle gas springs in extended
status!
4 Operating and adjusting
EN
11