Continuity Check - KPS TP5000HY Manual Del Usuario

TP5000HY
Single Pole Phase Check

Continuity Check

Ampere Mode
Warning
• Single Pole Check is available for both
test leads. Remove one of test leads
before performing check.
• Do not check if voltage appears by Single
Pole Phase Check. Measure voltage with
two pole to get a reliable result.
Resistor Mode
Warning
The barrier on the body is indicating the limit
of safe access of the hand-held part, do not
hold over the barrier when in normal use.
Do not assemble test lead at the back of the
meter while measuring current.
03
EN