ION Party Rocker Go Guia Del Usuario página 6

Bluetooth Dual Connect
This feature allows you to connect two devices to one Party Rocker Go
simultaneously.
Note: This feature does not work in Stereo-Link mode.
1. Connect your Bluetooth device "A" to Party Rocker Go
Connecting with Party Rocker Go
2. Connect your Bluetooth device "B" to Party Rocker Go
settings menu on device "B" and selecting Party Rocker Go. Connecting device "B" will
not disrupt the music that is playing from device "A".
Note: If play is pressed on device "B's" media player app, the music on device "A" will pause,
and the music on device "B" will play through Party Rocker Go. If play is pressed on device
"A's" media player app, the music on device "B" will pause, and the music on device "A" will
play through Party Rocker Go.
Bluetooth Call Answering
TM
Party Rocker Go
Bluetooth devices. Incoming calls will pause Bluetooth audio and play the device's ringtone
until the call is either answered or rejected:
To reject an incoming call, Press and hold the Play/Pause button for two seconds.
To answer an incoming call, press the Play/Pause button and then quickly release it.
During a call, press the Volume Up/Down buttons to adjust the volume of the caller.
When you wish to end a call, press the Play/Pause button. Bluetooth audio will resume
playing at this time.
Connecting an Audio Device Using the Aux Input
1. Connect a 1/8" (3.5 mm) auxiliary cable to the input on the rear panel of Party Rocker Go
and connect the other end to an audio device such as an MP3 or CD player. The speaker
will automatically switch the audio source to Aux mode but will maintain all Bluetooth
connections.
2. Press play on your device's music player. Use the Volume Up/Down buttons to adjust the
Aux volume.
Note: Party Rocker Go
device. Lower the volume on your device if signal distortion occurs.
3. Disconnect the Aux cable to exit Aux mode. Party Rocker Go
mode it was in before the Aux connection, Bluetooth or Radio.
6
can receive incoming calls and act as a speakerphone for connected
TM
speaker volume controls act independently from your connected
TM
.
TM
via Bluetooth
TM
as seen in Bluetooth
TM
by navigating to the Bluetooth
TM
will revert to the audio
TM