Description Of Device; Overview - Fig. I; Description Of Application - Fig. Ii; Device Information - wow! LOOQER Traducción Del Manual Original

1. Description of device
1.1 Overview - fig. I
1. 16-pin OBD-II connector (SAE J1962) with integrated lighting
2. Multi-coloured LED status display showing connection status.
3. Button Flight recorder button for starting/stopping and setting triggers during flight recorder operation
4. USB-C port
5. LED lamp button in the extension cable
6. LED lamp button
7. Extension cable OBD-II connector
1.2 Description of application - fig. II
1. Removable hook clip with suction cup
2. Hook clip for attaching the LOOQER
1.3 Device information
Designation:
Art. no.:
Display
Interfaces / Connections
Power supply
Conformity
Supported buses
CAN-FD technology
DoIP – Diagnostics over Internet
Protocol
Pass Thru J2534
LOOQER
W072 003 000
Optical and acoustic feedback of the running processes via 360° LED light
ring for an optimum diagnostic procedure
Warning sound if Bluetooth
Bluetooth v4.2 - BR/EDR and Bluetooth
®
(Class 2): Inner, protected Bluetooth
USB-C cable
Detachable extension cable with light
WLAN: 2.4 GHZ, 802.11b/g/n, range up to 400 m
Diagnostic connection: ISO 15031-3 (SAE J1962) ; 16-pin connector with
integrated LED light
Connection of older adapter cable (vehicle-specific) at 16-pin OBD connector
Replaceable OBD connector head
6-36 V, protected against polarity reversal, max. current consumption 500 mA
Display of voltage monitoring of the vehicle battery on the unit and in the
diagnosis mask
RED 2014/53/EU, LVD 2014/35/EU, RoHs 2011/65/EU
2 x HS CAN (ISO 11898-2), SW CAN (SAE J2411)
K/L (ISO 9141-2), VPW (J1850), PWM (J1850), RS485 (J1708)
TTL and SPI, (analogue in, 5 volts out)
3 CAN lines simultaneously – for fast CAN bus communication
Integrated (ISO 13400-2)
Supports several channels – Pin button for one-channel support:
CAN, SW_CAN, ISO15765, SW_ISO15765, ISO9141, ISO14230
/ WLAN connection is interrupted
®
Low Energy
®
antenna, range up to 30 m
®
20