AL-KO CS 1825 Manual De Instrucciones página 30

GB
TRANSLATION OF THE ORIGINAL INSTRUCTIONS FOR USE
Contents
1 About these operating instructions .......... 31
1.1 Symbols on the title page................... 31
1.2 Legends and signal words ................. 31
2 Product description .................................. 31
2.1 Designated use .................................. 31
2.2 Possible foreseeable misuse ............. 32
2.3 Residual risks..................................... 32
2.4 Safety and protective devices ............ 32
2.4.1 Switch-on protection .................... 32
2.4.2 Chain brake/chain brake bracket. 32
2.4.3 Overload protection ..................... 32
2.4.4 Run-out brake.............................. 32
2.4.5 Chain interception bolt................. 32
2.5 Symbols on the appliance .................. 32
2.5.1 Safety signs ................................. 32
2.5.2 Operating signs ........................... 33
2.6 Product overview (01) ........................ 33
2.7 Scope of supply (02) .......................... 33
3 Safety instructions ................................... 33
3.1 General Power Tool Safety Warnings 33
3.1.1 Work area safety ......................... 33
3.1.2 Electrical safety ........................... 34
3.1.3 Personal safety............................ 34
3.1.4 Power tool use and care.............. 34
3.1.5 Battery tool use and care............. 35
3.1.6 Service......................................... 35
3.2 Chain saw safety warnings ................ 35
3.3 General safety warnings for chain
saws ................................................... 36
3.4 Causes and operator prevention of
kickback ............................................. 36
3.5 Vibration load ..................................... 36
3.6 Noise pollution.................................... 37
3.7 Safety notes for rechargeable battery
and charger ........................................ 37
3.8 Safety information when working ....... 37
3.8.1 Operator ...................................... 37
3.8.2 Operating times ........................... 37
30
Translation of the original instructions for use
3.8.3 Working with the chain saw ......... 38
4 Installation ................................................. 38
4.1 Installing the chain bar (03, 04) .......... 38
4.2 Fitting the saw chain (04) ................... 38
4.3 Tensioning the saw chain (03, 05)...... 39
5 Start-up...................................................... 39
5.1 Charging the rechargeable battery ..... 39
5.2 Fitting and removing the recharge-
able battery (06) ................................. 39
5.3 Filling saw chain oil (07) ..................... 39
5.4 Checking the chain tension ................ 40
5.5 Testing the function of the chain
brake................................................... 40
5.5.1 Function test of the chain brake
with the engine switched off (08) . 40
5.5.2 Function test of the chain brake
with the motor switched on (08) ... 40
6 Operation................................................... 41
6.1 Check the saw chain oil ...................... 41
6.2 Testing the chain brake ...................... 41
6.3 Switching the motor ON and OFF
(09) ..................................................... 41
6.4 Checking the charge status of the re-
chargeable battery .............................. 41
7 Working behaviour and working tech-
nique.......................................................... 42
7.1 Felling trees (10, 11)........................... 42
7.2 Delimbing (12) .................................... 43
7.3 Cross-cutting (13 - 16) ....................... 43
7.4 Cutting converted timber .................... 43
8 Maintenance and care............................... 44
8.1 Sharpening the saw chain (17) ........... 44
8.2 Cleaning the chain sprocket interior ... 44
8.3 Changing over the quick-tension
chain wheel (18) ................................. 45
8.4 Checking, turning and greasing the
chain bar (19, 20) ............................... 45
8.5 Chain maintenance table .................... 45
9 Help in case of malfunction ....................... 46
CS 1825