Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
INSTALLING AND REMOVING REAR WHEELS (AS STROLLER - 2)
Insert the rear axle into the plastic hole shown and check that the axle is locked.
Pull up red LOCK pin meanwhile pull out the rear wheel.
PLACE AND REMOVE THE TOWBAR (AS STROLLER - 3)
Insert the tow bar to square groove. The drag bar can be lowered by pressing the
fixed pin in the figure
ADJUST THE HANDLE BAR (AS STROLLER - 4)
At the same time press and hold the left and right adjustment button, turn the
handle to the use height
PARKING AND RELEASE THE TRAILER (AS STROLLER - 5)
Attention: When stopping, the stop bar must be stepped down
3
Publicidad
Tabla de contenido
