Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

ASSEMBLY

Tools required for assembly (not included in the scope of delivery):
Phillips screwdriver
Secure the housing part B to the housing part A with
4 screws (M6 x 50), 4 nuts and 8 washers.
Keep these operating instructions for future reference.
If you have already opened the box and removed all packaging, ignore 
steps 1 and 2. Go directly to step 3.
Step 1
1. Open the box and remove all the components. Make sure that everything 
is included in the scope of delivery.
2. Remove the box and make sure that no accessories remain in the box.
3. Remove all the packaging material except for the honeycomb paper 
surrounding the fire bowl.
Step 2
1. Place the fire bowl upside down on a level surface.
2. Remove all the honeycomb paper that is wrapped around the fire bowl.
1
2
Spin the assembled enclosure so that
it is facing the right way.
EN
37

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

100394091003941010039411

Tabla de contenido