DHC BT2400 Manual Del Propietário página 11

12V & 24V SYSTEM TEST:
1. Select "SYSTEM TEST" from the main menu.
2. Enter or scan the VIN of the vehicle.
*The VIN input method is the same as VIN input of the battery test.
3. Turn off loads and start engine.
Battery
System
Test
V/A
Setting
Meters
Cranking Result
Cranking Voltage
System
Test
Lowest Voltage
4. Use directional keys to review cranking test result.
5. Select NEXT to proceed to charging test.
6. Check "Is it a diesel engine?" by selecting YES / NO.
*If YES, the BT2400 will ask
the user to rev the engine for
40 seconds before proceeding
to idle & load on test.
*If NO, the BT2400 will
proceed with the idle & load on
test directly.
IR
Test Test
History
Normal
10.78V
9.09V
System
Test
Cranking Result
System
Test
Is it a diesel engine?
System
Test
11
Cranking Test
Turn off loads
Start engine
<<NEXT>>
YES / NO