DHC BT2400 Manual Del Propietário página 9

6. Select Capacity
Available capacity range:
25~3000 CCA/SAE
25~3300 EN
25~2830 EN2
25~1985 IEC
JIS (By Battery Type)
25~1685 DIN
25~3600 CA/MCA
7. Check if the battery is tested in a vehicle or not. (Select Yes/No)
8. After setup, the BT2400 will
ask the user to point its
temperature sensor at the
battery, press ENTER to
confirm temperature reading
and continue.
9. BT2400 will then check if the
user would like to proceed an
In-Vehicle Test,
If yes, the BT2400 will
automatically proceed to the
system test after the battery
test is completed. If no, the
BT2400 will perform only the
battery test.
10. Start Testing:
The BT2400 will automatically perform a battery test or In-Vehicle Test
after item 7 has been checked.
Use the dircetionl keys to review the test result. Or move the cursor to the
printer icon to print out the result.
Aim the temperature
sensor to the battery.
Proceed In vehicle Test?
YES / NO
9