Tabla de contenido
Publicidad
q
w e
1) Unscrew the garden-hose connector
2 from the bottom cowling fitting 1.
2) Screw the garden-hose connector 2
onto a garden-hose 3 which is con-
nected to a fresh-water supply.
3) Open the water tap and let the water
flush through the cooling passages.
4) Run the engine at an idle speed in
neutral for about 15 minutes.
5) After stopping the engine, turn off the
water and disconnect the garden-
hose connector.
6) Reinstall the garden-hose connector
on the fitting on the bottom cooling.
cC
Do not leave the garden-hose connector
loose on the bottom cowling or let the
hose hang free during normal operation.
Water will leak out of the connector
000843
instead of cooling the engine, which can
cause serious overheating. Be sure the
connector is tightened securely on the fit-
ting after flushing the engine.
4-5
GB
Publicidad
Tabla de contenido
