Klarstein BORNHOLM SMART Manual De Instrucciones página 23

Switching on
Connect the device to the power supply. The operating lamp comes on with a short
humming sound. Switch on the device with the On/Off key (4). Now the current room
temperature lights up in the display. The factory preset temperature is 35 °C.
Setting the temperature
Press the setting key (1). The numbers „10" and „9" flash. Then press arrow keys (2) and
(3) to increase or decrease the temperature by 1 °C.
Setting the timer
Switch-on time: In the switched-off state, press key (1) twice to set the timer to
1-24 hours. Press keys (2) and (3) to set the temperature. After setting, the ambient
temperature is displayed. The indicator (8) lights up when the timer is running and goes
off when the timer has expired.
Switch-off time: In heating mode, press the key (1) to set the timer to 1-24 hours. After
setting, the ambient temperature is displayed. The indicator (8) lights up when the timer
is running and goes off when the timer has expired. Then the device stops heating
operation.
Setting the heating level
a. In operation mode, button (2) alternates between high heating level and heating
stop (indicator (7) lights up when high heating level is on and goes off when
heating is off).
b. In operation mode, button (3) toggles between low heat and heat off (indicator 6
lights when low heat is on and goes off when heat is off).
c. In operation mode, button (12) toggles between off/low/high heating. When the
heating level is high, the indicator (7) lights up, and when the heating level is low,
the indicator (6) lights up.
EN
23