ECOVACS DEEBOT X1 OMNI Manual De Instrucciones página 25

No. Malfunction
AIVI Visual Detection Sensor
13
cannot recognize objects.
After returning to the Station,
14 DEEBOT does not empty the
Dust Bin.
15 Fail to empty the Dust Bin.
The inner side of Dust Collection
16
Cabin is dirty.
Ash leakage occurs during
17
working.
Possible Causes
The cleaning area is not well illuminated.
AIVI Visual Detection Sensor lens is dirty or blocked.
Dust Collection Cabin is not closed.
Dust Bag is not installed in the Station.
Manually moving DEEBOT back to the Station might
not trigger Auto-Empty function.
DEEBT will automaticlly return to the Station in Video
Manager mode.
In Do Not Disturb mode, DEEBOT will not empty the
dust after returning back to the Station.
The Station detects a decrease in empty efficiency.
If the above possible causes have been ruled out,
components of the Station may be abnormal.
The Station detects a decrease in empty efficiency.
The outlet of Dust Bin is blocked by foreign objects.
Fine particles are absorbed in the inner side of Dust
Collection Cabin through the Dust Bag.
The Dust Bag is broken.
The outlet of Dust Bin is blocked by foreign objects.
Solutions
Smart Recognition requires sufficient lighting. Please
make sure the areas to be cleaned are well illuminated.
Clean the lens with a clean soft cloth, and make sure
the sensor is not blocked. Avoid using any detergent or
cleaning spray while cleaning.
Please close the Dust Collection Cabin .
Install the Dust Bag, and close the Dust Collection Cabin .
It is recommended to let DEEBOT return to the Station on its own.
Please do not manually move it.
DEEBOT will not do cleaning task and empty the Dust Bin in
Video Manager mode. This is a normal phenomenon, please rest
assured to use.
Cancel Do Not Disturb mode in ECOVACS HOME App or
manually start dust empty.
Replace the Dust Bag according to the
close the Dust Collection Cabin. If the Dust Bag is not full when
prompted by ECOVACS HOME App, you can put it back again.
Please contact Customer Care for help.
Replace the Dust Bag according to the
close the Dust Collection Cabin. If the Dust Bag is not full when
prompted by App, you can put it back again.
Remove the Dust Bin and clean the foreign objects on the outlet.
Clean the inner side of Dust Collection Cabin.
Check the Dust Bag. Replace it.
Remove the Dust Bin and clean the foreign objects on the outlet.
[Maintenance] section and
[Maintenance] section and
25 EN