12
Demonstration Program
The razor has a 1-minute demonstration program that will
run through the full display of razor functions. During the
demonstration the razor will automatically turn ON and
OFF 4 times. To activate, press and hold the ON/OFF
button for 6 seconds until all symbols disappear on the
display. You can interrupt the demonstration by pressing the
ON/OFF button again.
Cleaning Indicator
The blinking faucet symbol and the short beep will
remind you that razor heads need to be cleaned. This
happens approximately once a week (in the case of
normal use).
Replacement Head Indicator
Every year, depending on your shaving behavior after
turning the razor OFF, a few beeps are audible for 3
seconds and the replacement head symbol indicator as
well as the word REPLACE will be visable.
It will remain visable for 2 weeks to remind you that
with new shaving heads you will guarantee yourself
optimal shaving performance. After 1 week the beeps
are audible for 5 seconds. After 2 weeks the beeps are
audible for 10 seconds.