Sony WAHT-SA2 Manual De Instrucciones página 9

Your room
S-AIR main unit
ID A
ID A
Surround
amplifier
x After the pairing operation
(example)
Sound transmission is established between
the surround amplifier and the S-AIR main
unit that performed the pairing operation.
Your room
S-AIR main unit
ID A
ID A
Surround
amplifier
Pairing
1
Turn on the S-AIR main unit and
the surround amplifier.
The system turns on.
2
Match the IDs of the S-AIR main
unit and the surround amplifier.
Neighbor
ID A
Other S-AIR
products
Neighbor
No transmission
ID A
Other S-AIR
products
3
Set up the S-AIR main unit so it is
ready for pairing.
For details, refer to the operating
instructions of the S-AIR main unit.
The S-AIR/STANDBY indicator on
the surround amplifier flashes green.
4
Press PAIRING on the rear panel
of the surround amplifier.
The PAIRING indicator flashes when
pairing starts.
When sound transmission is
established, the S-AIR/STANDBY
indicator turns green and the PAIRING
indicator turns on.
If you use more than one surround
amplifier, perform Steps 3 and 4 for
those also.
Tip
• To press PAIRING, a slim instrument, such as a
paper clip, can be used.
To cancel pairing
Change the IDs of the S-AIR main unit and
the surround amplifier (page 7).
9
GB