Descargar Imprimir esta página

Team kalorik TKG CRM 1002 Manual De Instrucciones página 5

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
Remove all packaging material.
Clean the appliance (cf. "Cleaning and care"). It is recommended to heat up the
appliance for about 10 minutes without any foodstuffs in order to eliminate the
grease that may have adhered during manufacture and the "new" smell.
Ventilate the room during this period and during use in general.
OPERATION
Prepare pancake dough using your usual recipe.
Put a cloth under the appliance to protect your table from possible leaks or spatters.
Once you have made your pancake dough, preheat your appliance during 10
minutes.
Put the plug in an earthed power outlet.
When the appliance has reached the right temperature, and before you begin baking
your pancakes, pour a small quantity of oil on the pancake space to prevent your
pancakes from burning or sticking to the plate. If necessary, repeat this operation while in
use.
Pour the amount of dough that corresponds to the circles on the plate.
Warning! Do not pour too much dough because it might spill over the plate.
Turn over the pancakes with a plastic or wooden spatula. Do not use metallic utensils
as they could damage the plate.
According to your taste, you can add salty or sweet ingredients, hot or cold ones...
Let the choice be yours.
The baking times vary according to your personal taste.
When baking is finished, disconnect the appliance.
CLEANING AND CARE
Before cleaning, make sure that the plug has been removed from the mains supply
socket.
Let the appliance cool down thoroughly and remove the plug from the device. To
do this, simply hold the cord plug firmly and pull.
Never immerse the appliance completely or partially in water or any other liquid, but
if water leaks from the electrical connections, allow it to dry before re-use.
Wipe the outer surfaces of the appliance and the baking plate with a damp cloth
and dry afterwards.
When baked-on foods are hard to remove, brush the baking plate with a little
cooking oil. Allow to stand for 5 minutes, then wipe with a damp cloth and dry
thoroughly.
Do not use harsh abrasive cleaners as these might damage the non-stick coating.
Make sure no water or other liquid penetrates into the appliance.
Never clean the appliance under running water. Never immerse the appliance in
water or any other liquid.
TKG CRM 1002
5

Publicidad

loading