Discrete I/O - OHAUS Defender Serie Manual Del Usuario

EN-26

3.6 Discrete I/O

Long press the button
Menu.
Select Application Mode by pressing the Softkey
corresponding to the icon
Press the Softkey corresponding to the icon
enter the sub-menu Application Mode.
Enable
The current selected application mode can't be set Off.
Discrete I/O setup menus allow the configuration of 2 inputs and 4 outputs depending on different
application mode.
Reset
If Reset is selected and confirmed, all the submenu value will be set to default.
to enter the Main
.
to
Defender 5000 Indicators