Maintenance And Care; Regular Maintenance Work; Cleaning The Appliance And Mower Mechanism; Checking And Renewing The Cutting Blade - AL-KO 32.1 Li Traducción Del Manual Original De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 59

Maintenance and care

thick grass, increase the cutting height and
mow in several passes.
Wind and sun can dry out the lawn after
mowing so it is better to mow in the late after-
noon.
8 MAINTENANCE AND CARE
WARNING! Danger of cuts and lacera-
tions. Danger of cuts and lacerations when
reaching into sharp-edged, moving appliance
parts and into cutting tools.
Before maintenance, care and cleaning work,
always switch off the appliance. Remove the
rechargeable battery.
Always wear protective gloves during mainte-
nance, care and cleaning work.
8.1

Regular maintenance work

Make sure that all nuts, bolts and screws are
tightened and the appliance is in a safe work-
ing condition.
Check the grass collector regularly for correct
operation and wear.
8.2
Cleaning the appliance and mower
mechanism
IMPORTANT! Danger from water. Water in
the appliance causes short-circuits and destroys
electrical components.
Do not spray the appliance with water.
Only use a broom or a brush for cleaning.
1. Stop the motor (Stopping the motor).
2. Pull out the rechargeable batteries.
3. Unhook the grass catcher.
4. Tip the appliance onto the side and clean the
mower mechanism with a broom or brush.
443121_a
8.3
Checking and renewing the cutting
blade
WARNING! Severe injuries due to blade
parts being flung out. A worn, cracked or dam-
aged cutting blade can break, and its parts can
become dangerous projectiles.
Regularly check the cutting blade for dam-
age.
Do not use the lawnmower if the cutting
blade is worn or damaged.
Have blunt or damaged cutting blades sharp-
ened or replaced only by one of the manufac-
turer's service centres or an authorised spe-
cialist company.
To avoid vibrations, the cutting blade and
blade bolt must always be replaced together.
Resharpened cutting blades must be bal-
anced. Unbalanced cutting blades cause
strong vibrations and damage the mower.
8.4

Repair work

WARNING! Risk of injury during repair
work. Improper repairs can lead to serious inju-
ries and damage to the appliance.
Have repair work performed by the manufac-
turer's service centres and authorised spe-
cialist companies only!
In the following cases, visit the AL-KO service
centre:
Motor no longer starts.
Appliance has moved onto an obstruction.
Cutting blade and/or motor shaft are bent.
Appliance vibrates and does not run smooth-
ly.
Rechargeable battery has discharged or is
damaged.

9 HELP IN CASE OF MALFUNCTION

CAUTION! Risk of injury. Sharp-edged
and moving appliance parts can lead to injury.
Always wear protective gloves during mainte-
nance, care and cleaning work!
NOTE For malfunctions that are not listed in
this table or that you cannot resolve yourself,
please contact our customer service.
27

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

38.1 li

Tabla de contenido