Candy COT1S45EW Manual De Usuario página 21

Reversing the inner doors
1.remove the screw cover on the right side,
then unscrew the screws.
3.
install the screw cover from left side to
right side.
Ensuring the door seals correctly:
It is normal for the seal to be compressed after the door has been reversed. With the door
closed, use a hair dryer to expand the seal and fill the gap between the door and the body
of the appliance. Take care not to use the hair dryer too close to the appliance, which could
damage the seal. A distance of approximately 10cm should be adequate. When completed,
allow the seal and door to cool before touching them. Once done, the seal should remain
in position.
2.
remove the screw cover on the left side.
4. Rotate inner door and install to the left side
and then install the screws.
20
21