Publicidad
computer & interactive stylus
9200IW • 9200IC
Note: If you do not have the
eBeam software installed
on your computer, you can
install it from the 3M Digital
WallDisplay CD-ROM.
➊
1. Connect the VGA cable
from the VGA/Monitor port
on the computer to the VGA
on the Digital WallDisplay.
➋
2. Connect the serial cable
from the serial/COM port
on the computer to the
Computer on the Digital
WallDisplay.
3. Connect the PC Audio
➌
cable
from the
Headphones jack on the
computer to the PC Audio on
the Digital WallDisplay.
➍
4. Press the On/Off button
on the Digital WallDisplay to
turn on the lamp.
Note: If you are using a
laptop, toggle the display
function by using one of
the following methods:
Fn +
or
Fn + LCD/CRT.
5. Double-Click the eBeam
desktop icon on your
➎
computer
to launch the
whiteboard software.
➏
6. Click the Calibrate button
in the 3M Digital WallDisplay
calibrate dialog box.
7. Tap each of the highlighted
➐
targets
with the interactive
stylus.
8. Use the eBeam annotation
➑
tools
to annotate your
presentation.
1-800-328-1371
➌
�����
���
�����
������� ���
��
��
�����
�����
�
���
�
�
�
�������
�
�
�
5
➊
�����
���
������
�����
��������
➋
�
�
�
www.3M.com/meetings
������
������������
Publicidad
