Troubleshooting Guide - Black and Decker BCPC20 Manual De Instrucciones

ENGlIsh

TROUBLESHOOTING GUIDE

BE sURE To FolloW saFETY RUlEs aND INsTRUCTIoNs
PROBLEM
Unit will not start.
Battery pack will not charge.
Unit shuts off abruptly.
32
POSSIBLE CAUSE
Battery pack not installed properly.
Battery pack not charged.
Internal componets too hot.
Brushes worn out.
Battery pack not inserted into charger.
Charger not plugged in.
Surrounding air temperature too hot or too cold.
Battery pack has reached its maximum thermal
limit.
Out of charge. (To maximize the life of the
battery pack it is designed to shut off abruptly
when the charge is depleted.)
POSSIBLE SOLUTION
Check battery pack installation.
Check battery pack charging requirements.
Allow tool to cool down.
Have brushes replaced by an authorized
BLACK+DECKER service center.
Insert battery pack into charger until LED
illuminates.
Plug charger into a working outlet. Refer to
"Important charging notes" for more details.
Move charger and battery pack to a surrounding
air temperature of above 40 degrees F (4,5°C) or
below 105 degrees F (+40,5°C).
Allow battery pack to cool down.
Place on charger and allow to charge.