KTM ROADLOK Instrucciones De Montaje página 22

5 ASSEMBLY
5.1
8
Assembly
Info
Installation at an authorized specialist workshop is recommended.
502749-01
502750-01
502752-01
Preliminary work
–
Raise the vehicle with a center stand (see Owner's Manual).
–
Place a load on the rear of the vehicle.
The front wheel is not in contact with the ground.
Assembly
–
bo
Remove screws .
Guideline
bp
If spacers are installed between the axle clamp and the
brake caliper on some models, these are not to be removed
under any circumstances.
Info
Depending on the vehicle model, different spacers and
screws are used (see Chapter 6).
–
1
Mount brake disc lock
included) and tighten.
Guideline
Screw, brake M10
disc lock
Info
For the KTM 690 DUKE / R 2008-2019 and the KTM 790
DUKE 2018 with original brake discs, spacers
used.
–
1
Mount brake disc lock
bk
spacers (all included) and tighten.
Guideline
Screw, brake M10
disc lock
5
with screws and spacers
45 Nm (33.2 lbf ft)
Loctite ®
bk
are also
6 5
with spacers , screws
45 Nm (33.2 lbf ft)
Loctite ®
6
(all
243™
and
243™