Connecting Printer, Stadiometer, Blood Pressure Monitor, And Barcode Reader - inbody 570 Manual De Instrucciones

E. Connecting Printer, Stadiometer, Blood Pressure Monitor, and Barcode Reader
1. Printer
In order to print InBody Results Sheets, an InBody570 compatible printer is required.
* A list of printers compatible with the InBody570 can be found at https://www.inbodyservice.com.
1) First turn off the InBody570 and then the printer.
* You may experience connection issues in connecting the printer to the InBody570 if the InBody is turned on.
2) Plug the USB cable provided with the printer into the USB HOST port on the rear panel of the InBody570 and
plug the other end of the USB cable into the printer.
3) Turn on the printer.
4) Turn on the InBody570 and setup your printer under Settings of the Administrator Menu '09. Printer Setup'.
5) You can edit your printing settings under Settings of the Administrator Menu from '10. Results Sheet Types'
through '15. Printing Alignment'.
2. Stadiometer
If a stadiometer is connected to the InBody570, the height values measured by the stadiometer will be sent
directly to the InBody570.
* Always connect a stadiometer from InBody.
1) First turn off the InBody570 and then the stadiometer.
* You may experience connection issues in connecting the stadiometer to the InBody570 if the InBody is turned on.
2) Plug the serial cable provided with the stadiometer to the 9-pin stadiometer serial port on the rear panel of
the InBody570.
3) Turn on the stadiometer.
4) Turn on the InBody570. If the stadiometer is connected to the InBody570, the stadiometer icon(
appear on the top left corner of the screen when no one is on the footplate.
14 14
4
4
4
USB HOST port
4
9-pin stadiometer
serial port
4
4
) will
4
4