Important; Product Name - Canon imageRUNNER ADVANCE DX 4845i Instrucciones De Seguridad Importantes

• Do not plug in or unplug the power plug with wet
hands.
• During holidays or other times when the machine
will not be used for long periods, turn the machine
off and unplug it from the power supply.

IMPORTANT

En
• Install this machine near the power outlet and leave
sufficient space around the power plug so that it can
be quickly unplugged in an emergency.
• Always ensure that the power plug is unplugged
from the power outlet before starting work.
Es
• Do not connect the power cord to an uninterruptible
power supply. Doing so may result in a malfunction
or fault if a power failure occurs.
• Do not connect the power cord to the auxiliary
power outlet on a computer.
• We recommend using a power outlet wired via a
household earth-leakage circuit breaker.
• Electrical noise may cause this machine to
malfunction or lose data.
• When reconnecting the power cord after
disconnecting it, wait at least 5 seconds before
reconnection.
• A voltage drop that exceeds the permitted range
may result in a malfunction or loss of data in the
machine and any connected computers.
• For information on your power supply, contact your
power supplier or your local electrical appliances store.
Handling
WARNING
Observe the following
Improper handling may lead to a fire, electric shock or
burns.
• If the machine makes an unusual noise, emits an
unusual smell, emits smoke or excessive heat, or if
any parts are damaged, immediately unplug the
machine from the power outlet and contact your
dealer or service representative.
• Do not disassemble or modify this machine.
• Place the machine such that the power cord and
other cables and the gears and electrical parts inside
the machine are well out of the reach of children.
• Do not place jewelry or other metal objects or
containers filled with liquid on the machine.
• Do not use flammable sprays near this machine.
• When moving this machine, always turn the machine
off at the power switch, unplug the machine from
the power outlet and then disconnect the power
cord and interface cables.
• When connecting or disconnecting a USB cable
while the machine is still plugged into a power
outlet, do not touch the metal part of the connector.
• Do not connect unapproved products to ports on
this machine (power outlet, connector ports, etc.).
Cleaning and maintaining this machine
Improper cleaning may result in machine malfunctions,
fire, electric shock or static electricity.
• You should clean this machine regularly.
• Before cleaning, always turn the machine off and
unplug it from the power outlet.
• Unplug the power plug periodically and wipe the
machine with a dry cloth to remove dust and grime.
• Clean the machine using a cloth moistened with water
and then thoroughly wrung out. Do not use alcohol,
benzene, paint thinners or other flammable substances
and do not use tissue paper or paper towels.
• Regularly check the machine for overheating, rusting,
dents, scratches and cracks.
Users of cardiac pacemakers
This machine and its toner cartridges emit low levels of
magnetism and ultrasonic waves. If you use a cardiac
pacemaker and experience any abnormalities, move
away from the machine and consult your physician.
CAUTION
Take care not to drop heavy objects, on the platen
glass
Doing so may damage the platen glass and result in
injury.
Observe the following
Failure to do so may result in injury, faults or paper jams.
• Do not place heavy objects on this machine.
• Take care not to trap your hands when using parts
that open and close.
• To avoid your hands or fingers being trapped, do not
touch the paper eject rollers.
• Take care to avoid cutting your hands or fingers on
paper or machine parts when replenishing the paper
or clearing paper jams.
• Do not subject the machine to strong impacts or
shaking.
• Do not use undue force when opening and closing
doors, covers or drawers, etc. on the machine.
• Do not turn this machine off while it is printing.
• Do not open and close any covers, or remove or add
paper while the machine is running.
• Do not put your hands inside the machine unless
absolutely necessary.
Contact Canon when moving the machine
To move the machine, always contact your dealer or
service representative beforehand. Do not attempt to
move the machine yourself.
Using the feeders or platen cover correctly
Improper use may result in injury.
• When making copies of items such as thick books
on the platen glass, do not press down hard enough
to damage the feeder or platen cover.
• Close the feeder or platen cover slowly.
• Do not slide your hand or fingers fully into the feeder
or platen cover.
Do not put your hands or fingers into the following
parts of the finisher (only for machines with the
Booklet Finisher installed)
Doing so may result in injury. Pay particular attention to
the staples themselves.
• Locations in the tray that will be stapled
• Rollers
Do not put your hand into the machine while the
paper drawers are removed (only for machines with
paper drawers installed)
Doing so may result in injury.
2
Do not touch high-temperature or high-voltage
components
Doing so may result in burns or other injury.
• Do not touch parts of the machine other than those
specified in the manual.
• Immediately after use, the inside of the machine and
the paper eject slots are hot and should not be
touched.
• Printed paper may become hot during continuous
printing and should be handled with care.
Cassette Heater
(only for products with a cassette heater)
When inspecting the inside of the machine with the
paper drawer removed, take care not to directly touch
the area surrounding the heater. Alternatively, turn off
the power to the machine and wait until it has fully
cooled down before inspecting it. Inspecting the
machine while still hot may result in burns, including
low-temperature burns.
Standard / regulation

Product name

In some sales regions, this product may be registered
under the names in parentheses ( ) below in accordance
with local safety regulations.
imageRUNNER ADVANCE DX 4845i/4835i/4825i
(F810300)
Telephone Equipment
WARNING
When using telephone equipment, basic safety
precautions should always be observed to reduce the
risk of fire, electric shock or injury, including the
following:
1. Do not use this product near water, such as near a
bath tub, wash bowl, kitchen sink or laundry tub, in a
wet basement or near a swimming pool.
2. Avoid using a telephone during an electrical storm.
There may be a slight risk of electric shock from
lightning.
3. Do not use the telephone to report a gas leak while
in the vicinity of the leak.