Teka HA-855 Hoja De Características página 9

6 Press any symbol to turn off the alarm. The
oven will remain off and AUTO will continue
to flash.
7 Keep pressing on MODE until you hear a
beep to show the function is now off. Then
set the controls to to switch off the
oven.
You can see how much time is left and change
the remaining cooking time. Follow the previous
instructions.
To cancel this function, just press + and - at the
same time.
Programming the Cooking Stop Time
1 Press MODE until you hear a beep. Then
press MODE until the word "End" appears
on the clock display.
2 Select the cooking stop time by pressing
+ or -.
3 You will then hear a beep and the present
time and the word "AUTO" will light up to
show that the oven will switch off automati-
cally.
4 Select a cooking function and temperature.
5 When it is the time for cooking to stop, the
oven will switch off and an alarm will sound.
6 Press any symbol to turn of the alarm. The
oven will remain off and AUTO will continue
to flash.
7 Keep pressing on MODE until you hear a
beep to show the function is now off. Then
set the controls to to switch off the
oven.
You can use this function even if you are coo-
king with the oven. If this is the case, follow
all of the above instructions except No. 4.
You can see the stop cooking time at any time
by following instruction No.1.
16
All manuals and user guides at all-guides.com
Programming Cooking Time and Cooking
Stop Time
11 Press MODE until you hear a beep. If you
press MODE again, the word "dur" will
appear on the clock display.
12 Select the cooking time by pressing + or -.
13 A beep will then sound and the present
time and AUTO will show.
14 Press MODE until you hear a beep. Then
press MODE until the word "End" appears
on the clock display.
15 Select the stop cooking time by pressing
+ or -.
16 A beep will then sound and the present
time and AUTO will show.
17 Select a cooking function and temperatu-
re.
18 The oven will remain off with AUTO on the
clock display. The oven is now programmed.
19 When it is the time for cooking to start, the
oven will switch on and cooking will conti-
nue for the selected time. The symbols
AUTO and will light up on the clock dis-
play.
10 When the programmed time is reach, the
oven will switch itself off and an alarm will
sound.
11 Press any symbol to stop the alarm. The
oven will remain off and AUTO will continue
to flash.
12 Press MODE until you hear a beep in order
to switch off the function. Then set the
controls to to switch off the oven.
You can see the state of the timer at any time
by following instructions 1 and 4.
If you wish to modify the timer setting, you
must cancel the function by pressing + and -
at the same time. Re-programme the oven by
following the instructions given.
Caution
In the event of power failure, your electronic
clock timer settings will be erased and 00:00
will flash on the display. Reset the clock and
programme again.
Fast preheating function
Caution
Fast preheating should not be used with the
Pizza function as it is unnecessary.
17