Worx WU305.1 Manual De Instrucciones página 8

ADDITIONAL SAFETY
POINTS FOR YOUR DRILL
1. Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
2. Fully unwind cable drum extensions to
avoid potential overheating.
3. When an extension cable is required you
must ensure it has the correct ampere
rating for your power tool and that it is in a
safe electrical condition.
4. Ensure your mains supply voltage is the
same as your tool rating plate voltage.
5. Your tool is double insulated for additional
protection against a possible electrical
insulation failure within the tool.
6. Always check walls and ceilings to avoid
hidden power cables and pipes.
7. After long working periods, external metal
parts and accessories could be hot.
8. Wear ear protectors with impact drills.
Exposure to noise can cause hearing loss.
9. Use auxiliary handles supplied with the
tool. Loss of control can cause personal
injury.
10. Hold tool by insulated gripping surfaces
when performing an operation where the
08
cutting tool may contact hidden wiring.
Contact with a 'live' wire will also make
exposed metal parts of the tool'live'and
shock the operator.
Hammer drill
All manuals and user guides at all-guides.com
SYMBOLS
Read the manual
Warning
Wear eye protection
Double insulation
Wear ear protection
Wear dust mask
ENG