Denon AVR-1602 Instrucciones De Operación página 18

ENGLISH
DSP surround simulation
• To operate the surround mode and surround parameters from the remote control unit.
1
Select the surround mode for the input channel.
SURROUND
MODE
(Remote control unit)
The surround mode switches in the following
order each time the SURROUND MODE button
is pressed:
STEREO DOLBY PRO LOGIC 5CH STEREO
MONO MOVIE ROCK ARENA JAZZ CLUB
VIRTUAL
VIDEO GAME
MATRIX
SURROUND
2
To enter the surround parameter setting mode, press the SURROUND button.
SURROUND
• The surround parameter switches in the following order each time the
MENU
SURROUND button is pressed for the different surround modes.
(Remote control unit)
3
Display the parameter you want to adjust, then use the
(right) buttons to set it.
(1) ROOM SIZE
Use the
(Remote control unit)
ROOM SIZE MED
(2) EFFECT LEVEL
Use the
(Remote control unit)
EFFECT LEVEL 10
(3) DELAY TIME
Use the
(Remote control unit)
DELAY
18
All manuals and user guides at all-guides.com
CD DVD/VDP
OFF 1 2 3
V. AUX VCR TV/DBS
4 5 6 7
INPUT MODE CDR / TAPE TUNER SHIFT
8 9 0
SURROUND
TAPE · VCR
MODE
1
6 7
CHANNEL
0
3 2 0
VIDEO SELECT CD·MD/CDR·DVD/VDP DISC SKIP+
TITLE
8 3 9
2
6 7
2
SYSTEM SURROUND
SET UP MENU
MASTER
CH SELECT VOL
3
SELECT
T.TONE STATUS MUTING
RETURN DISPLAY
• ROCK ARENA
• JAZZ CLUB
• VIDEO GAME
• MONO MOVIE • MATRIX • VIRTUAL
ROOM SIZE DELAY EFFECT
EFFECT DEFAULT DEFAULT
DEFAULT
(left) and (right) buttons to set the room size.
(Initial)
SMALL MED-S MED MED-L
(left) button (right) button
(left) and (right) buttons to set the effect level.
(Initial)
1 10 15
(left) button (right) button
(left) and (right) buttons to set the delay time.
(Initial)
0ms 30ms 110ms
30ms
(left) button (right) button
(4) DEFAULT
(Remote control unit)
NOTE:
• When making parameter settings, the display will return to the regular condition several seconds after the
last button was pressed and the setting will be completed.
• Operating the surround mode and surround parameters from the main unit's panel.
1 Press the SELECT buttons to select the surround
mode.
(Main unit)
• When press the UP button
STEREO DOLBY PRO LOGIC
VIRTUAL SURROUND
• When press the DOWN button
STEREO DOLBY PRO LOGIC
(left) and
VIRTUAL SURROUND
To select the surround mode while adjusting the surround parameters, channel volume or tone control,
press the SURROUND MODE button then operate the selector.
(Main unit)
LARGE
2
Press the SURROUND PARAMETER button.
Press and hold in the surround parameter button to select the parameter you want to set.
• The parameters which can be set differ for the different surround modes. (Refer to "Surround Modes and
Parameters" on page 19.)
(Main unit)
3
Display the parameter you want to adjust, then press the SELECT UP/DOWN buttons to set it.
NOTE:
• When playing PCM digital signals or analog signals in the 5CH STEREO, ROCK ARENA, JAZZ CLUB, VIDEO
GAME, MONO MOVIE or MATRIX surround modes and the input signal switches to a digital signal encoded
in Dolby Digital, the Dolby surround mode switches automatically. When the input signal switches to a DTS
signal, the mode automatically switches to DTS surround.
To reset the settings to the factory defaults, use the
buttons to display "Yes".
YES NO
DEFAULT Y/N
(left) button (right) button
B
5CH STEREO MONO MOVIE ROCK ARENA
MATRIX VIDEO GAME JAZZ CLUB
5CH STEREO MONO MOVIE ROCK ARENA
MATRIX VIDEO GAME JAZZ CLUB
(left) and (right)
1 2 1, 3