Specifications - Denon AVR-1602 Instrucciones De Operación

20 SPECIFICATIONS

2 Audio section
• Power amplifier
Rated output: Front:
Center:
Surround: 70 W + 70 W
Output terminals: Front:
Center/Surround:
• Analog
LINE input - PRE OUT
Input sensitivity/input impedance: 200 mV/47 kΩ/kohms
Frequency response: 10 Hz ~ 100 kHz: +1, –3 dB (TONE DEFEAT
S/N ratio: 98 dB (IHF-A weighted) (TONE DEFEAT
2 Video section
• Standard video jacks
1 V p-p, 75 Ω/ohms
Input/output level and impedance:
Frequency response: 5 Hz ~ 10 MHz — +1, –3 dB
2 Tuner section
[FM] (note: µV at 75 Ω/ohms, 0 dBf = 1 x 10
Receiving range: 87.50 MHz ~ 108.00 MHz
Usable sensitivity: 1.0 µV (11.2 dBf)
50 dB quieting sensitivity: MONO
STEREO
S/N ratio: MONO
STEREO
Total harmonic distortion: MONO
STEREO
2 General
Power supply: AC 230 V, 50 Hz
Power consumption: 200 W
Maximum external dimensions: 434 (W) x 147 (H) x 417 (D) mm
Mass: 9.8 kg
2 Remote control unit (RC-896)
Batteries: R6P/AA Type (two batteries)
External dimensions: 54 (W) x 172.5 (H) x 29 (D) mm
Mass: 120 g (including batteries)
For purposes of improvement, specifications and design are subject to change without notice.
All manuals and user guides at all-guides.com
(8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
70 W + 70 W
100 W + 100 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
(8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
70 W
(6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
100 W
(8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
100 W + 100 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
16 to 16 Ω/ohms
A or B
12 to 16 Ω/ohms or more
A + B
16 to 16 Ω/ohms
ON)
ON)
–15
W) [AM]
522 kHz ~ 1611 kHz
18 µV
1.6 µV (15.3 dBf)
23 µV (38.5 dBf)
80 dB (IHF-A weighted)
75 dB (IHF-A weighted)
0.15 % (1 kHz)
0.3 % (1 kHz)
ENGLISH
25