Electrical Connections - Kichler 56 Salvo Manual De Instrucciones

ELECTRICAL CONNECTIONS

WARNING: To avoid possible electrical shock, be sure you have turned off
the power at the main circuit panel before wiring.
Follow the steps below to connect the fan to your household wiring. Use the
wire connectors supplied with your fan. Secure the connectors with electrical
tape. Make sure there are no loose wire stands or connections.
WARNING: If your house wires are different colors than referenced in this
manual, stop immediately. A professional electrician is recommended to
determine proper wiring.
Step 1. Insert the receiver into the mounting bracket, and keep flat in
opposition of ceiling. (Fig. 16)
Step 2. Motor to Receiver Electrical Connections: Connect the BLACK wire
from the fan to BLACK wire marked "TO MOTOR L" from the receiver. Connect
the WHITE wire from the fan to the WHITE wire marked "TO MOTOR N" from
the receiver. Connect the BLUE wire from the fan to the BLUE wire marked
"FOR LIGHT " from the receiver. Secure all the wire connections with the
plastic wire connectors provided. ( Fig. 17)
Step 3. Remote Receiver to Outlet Box Electrical Connections: Connect the
BLACK (hot) wire from the ceiling to the BLACK wire marked "AC IN L" from
the receiver. Connect the WHITE (Neutral ) wire from the ceiling to the WHITE
wire marked " AC IN N" from the receiver. Secure all the wire connections with
the plastic wire connectors provided.( Fig. 17)
12 | KICHLER.COM
Mounting Bracket
Fig. 16
Outlet box
Black
Black ("AC IN L")
Receiver
Black ("TO MOTOR L")
Black (motor)
Blue (FOR LIGHT)
Blue (for light)
Fig. 17
Receiver
White
Green or bare copper (ground)
White ("AC IN N")
White ("TO MOTOR N")
Ground wire
White (Neutral)