Nuova Simonelli TALENTO Manual De Instrucciones página 57

EN
menu; the
time to be set. E.g. TIME 1, pressing ENTER
it is possible to enter the sub menu; the
keys are used to select the time,
HOURS and minutes MIN at which the wash alarm
must appear. Press ENTER
keys to set the time HOURS and minutes
MIN.
Press ENTER to confirm settings.
At the set time or times, the display will read WASH;
this will disappear once the wash has been com-
pleted. If 00 is set for HOURS and 00 for MIN at the
TIMES 1,2,3,4, the alarm is not enabled.
4.8 WASHING WARNING (Wash alarm cycles)
Pressing ENTER
sub menu. This programmes the number of cycles
after which the group wash warning is displayed. The
keys are used to increase/decrease
the number of cycles for viewing the group wash
message (min. 50 – max. NO LIMIT).
Press ENTER
to confirm settings.
4.9 MILK CLEAN WARNING
(Milk clean warning)
Pressing ENTER
sub menu. This programmes the number of hours
from the last milk beverage being dispensed, after
which the cappuccino maker cleaning warning is
displayed.
The keys are used to increase /
decrease the number of hours before the cappuc-
cino maker clearing message is displayed (min. NO
LIMIT – max. 12H).
Press ENTER
to confirm settings.
4.10 SEQUENTIAL HEATING
(Sequential heating)
Pressing ENTER
sub menu. The
enable/disable the SEQUENTIAL HEATING
All manuals and user guides at all-guides.com
keys are used to select the
and the
it is possible to enter the
it is possible to enter the
it is possible to enter the
keys are used to
(YES – NO) function.
HEATING function enabled, YES, the control board
will first heat up the coffee heating element and then
the services heating element; with the SEQUENTIAL
HEATING function disabled, NO, the control board
will heat the two boilers at the same time.
4.11 PROG ON OFF (Programming automatic
switch on/off)
This is to programme the automatic ON/OFF times
for the machine.
The default setting is for the machine to be set to
"STANDBY" every day of the week and therefore,
it needs to be switched on/ off using the ON/OFF
key.
Pressing ENTER
sub menu and the display will read as follows:
MONDAY
The keys are used to view the set-
tings for each day of the week.
Press ENTER
to set the required day of the
week; the
the hour and minutes for switching on and the hour
and minutes for switching off.
MONDAY
ON HOURS
MONDAY
OFF HOURS
MONDAY
DAY OFF
With the SEQUENTIAL
it is possible to enter the
keys are used to select
MONDAY
ON MIN
MONDAY
OFF MIN
55