EdilKamin SIDE 50X50 Instalación Uso Y Mantenimiento página 23

AIR FOR HEATING
CIRCULATION BY NATURAL CONVECTION
The environmental air enters from the side vents (12
released, hot, from the vents on the cover of the shell itself (14
For this mode, the caps of the vents at the base of the shell
must be removed and the environmental air must be able to
CIRCULATION BY FORCED VENTILATION
installation kit for the apparatus beneath the main body
Forced circulation of hot air is obtained by using the special kit
- regulator
- sensor
To install, proceed as follows:
wire pass through the opening on the right or left side of the air
electric socket.
mantel.
check that the sensor wire does not interfere with the sliding
door.
- Afterwards, insert the plug into the 220 V mains socket.
N.B.: the skirting board of the casing must be removable to al-
All manuals and user guides at all-guides.com
CIRCULATION OF HOT AIR
220 V mains
Fig. 11
Fig. 12
sensor
regulator
220 V mains
- 23
-
connection
grille
sensor
fan
regulator
clamp
vent (b)
fan