LEGRAND LEXIC Rex2000 D21SN Manual De Instrucciones página 6

3. Setting actual date and summer-/winter
changeover
MENU
Button activates the menu.
Select SET TIME... with button and
confirm with button OK . Select DATE...
with button and confirm with
OK
button .
Set year with buttons and
confirm with button OK .
Set day and month with buttons
and confirm with button OK .
Summer-/winter changeover
Summer-/winter changeover can be made manually or auto-
matically if set.
Choose the region of summer-/winter
(see table below) with buttons .
OK
Confirm with button .
If manual changeover is required choose nonE during the date
input. Automatic changeover depends on your country / area.
Choose the appropriate setting for your country / area.
Beginning End of
Choice summertime summertime
last Sunday last Sunday
Euro
in March in October
4th Sunday
last Sunday
Gb
in October
in March
1 ST Sunday last Sunday
US
in October
in April
No No
nonE
changeover changeover
Freely programmable date with regard to the
change from summer time to winter time
Nothern hemisphere
Put in the date at which the summer time starts
and ends at your location/in your country. The
weekday is automatically allocated to the date.
Southern hemisphere
On the southern hemisphere the date at which the
summer time starts/ends must be programmed for
the same year.
Set year with buttons and
confirm with button OK .
Set actual day and month
of summertime with
buttons and confirm with button
Set actual day and month
of real time with buttons
and confirm with button OK .
All manuals and user guides at all-guides.com
4. Setting switching times
Button MENU activates the menu. Confirm PROG... with button
Confirm PROG NEW... with button
SET
DATE
D/M/Y
Select desired day with buttons
OK
confirm with button
Advice: If chosen day already contains a program,
the program and Clr will be displayed.
SET
To delete the program confirm with button
DATE
D/M/Y
button the setting can be copied to the next
day (see copying switching times).
Set ON time with buttons
and confirm with button
Advice:
Setting advances in minutes.
Press once = 1 minute
SET
DATE Hold button = higher speed
SU/Wi
Set OFF time with buttons
and confirm with button
A maximum of 8 ON and OFF times can be set per day.
Country /
The settings for one day have to be
area
confirmed again with button
EU
Note:
When Clr appears in the display the programmed
day can be deleted with the key
GB
Copying switching times
Call up the copy function with button
Select the day on which you will copy the
only North
setting times with buttons
America
Confirm selection with button
For further days repeat operation.
Terminating program input
MENU
Press button as required until the
actual time appears.
5. Delete switching times
Button MENU activates the menu. Confirm PROG... with button
Confirm PROG NEW... with button
Select desired day with buttons
confirm with button OK
To delete program press button
New program can be set now (see §4).
If this day does not contain any program
press button OK twice.
OK
.
MENU
Press button as required until the actual time appears.
6. Setting delay time
The setting can only be executed in automatic operation.
Press together buttons
the setting.
The delay time can be set from 0h00 to
23h59 with buttons
OK
Confirm with button
OK .
OK .
ON
PROG NEW
24
and
18 6
.
1234567
12
OK
With
PROG NEW OFF
24
OK .
18 6
1234567
12
ON
PROG NEW
24
18
6
1234567
OK
. 12
PROG NEW
24
18 6
1234567
OK
.
12
PROG NEW
OK
.
24
18 6
1234567
.
12
.
PROG NEW
24
18 6
1234567
OK
.
12
24
18
6
1234567
12
OK .
OK .
and
PROG NEW
.
24
OK
.
18
6
1234567
12
to activate
PROG
.
.
7. Control contact with delay time
The delay time starts when the control signal is
switched off. The relay output switches on when
the control switch closes and remains closed
after the control contact opens for the set time
delay up to 23h59m (t on function diagram).
Any time switch program will over-ride the control
switch operation if it coincides with it (see func-
tion diagram).
When control contact is active the display will show the symbol
8. Check switching times
MENU
Button activates the menu. Confirm PROG... with
button OK . Select TIME CHECK... with button
with button OK . Select desired day with buttons
OK
confirm with button .
OK
With button check setting
times one after another.
Free storage locations will be
displayed with FrEE.
Terminating check switching times
MENU
Press button as required until the
actual time appears.
9. Hand ON/OFF
Select hand symbol with button
State of contact set by program
will be reversed.
= ON = OFF
The next program automatically returns
the switch to ON or OFF as programmed.
10. Continuous switching
Select with button
the symbol for continuous
override ON
or continuous override OFF
Terminating continuous switching
Select symbol with button symbol
for automatic operation.
11. Continuous switch for a preselected number of
days (1 to 99 days)
Select the symbol for permanent ON
or for permanent OFF
with the key .
OK
Acknowledge selection with the key .
Adjust the number of days with
the keys .
2 —> days ON/OFF
1 —> day ON/OFF
- - - - —> permanent ON/OFF
99 —> days ON/OFF
98 —> days ON/OFF
The continuous switch is activated immediately
and ends after expiry of the adjusted days at
24:00 hours. The adjusted days are displayed
till the end of the continuous switching.
OK
Acknowledge with the key .
Premature termination of the continuous
switch
Select the symbol for automatic operation with the key
24
18
6
1234567
12
.
and confirm
and
TIME CHECK ON
24
18 6
1234567
12
24
18 6
1234567
12
24
18 6
1234567
12
24
18 6
1234567
12
24
18 6
1234567
12
24
18 6
1234567
12
.