Technical Data - Skil 2436 Manual Original

Cordless
screwdriver
INTRODUCTION
• This tool with left/right rotation is
intended for screwdriving in wood
• This tool is not intended for
professional use
• Read and save this instruction manual 3

TECHNICAL DATA 1

Max. torque for hard screwdriving
application according to ISO 5393 : 7 Nm
TOOL ELEMENTS 2
A On/off switch
B Switch for changing direction of rotation
C Magnetic bitholder
SAFETY
GENERAL SAFETY INSTRUCTIONS
WARNING! Read all safety
warnings and all instructions. Failure
to follow the warnings and instructions
may result in electric shock, fire and/or
serious injury. Save all warnings and
instructions for future reference. The
term "power tool" in the warnings refers to
your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away
while operating a power tool.
Distractions can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the
outlet. Never modify the plug in
any way. Do not use any adapter
plugs with earthed (grounded)
power tools. Unmodified plugs and
All manuals and user guides at all-guides.com
b) Avoid body contact with earthed or
2436
c) Do not expose power tools to rain
d) Do not abuse the cord. Never use
e) When operating a power tool
f) If operating a power tool in a damp
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing
b) Use personal protective
c) Prevent unintentional starting.
d) Remove any adjusting key or
4
matching outlets will reduce risk of
electric shock.
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or grounded.
or wet conditions. Water entering a
power tool will increase the risk of
electric shock.
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts. Damaged or
entangled cords increase the risk of
electric shock.
outdoors, use an extension cord
suitable for outdoor use. Use of a
cord suitable for outdoor use reduces
the risk of electric shock.
location is unavoidable, use an
earth leakage circuit breaker. Use
of an earth leakage circuit breaker
reduces the risk of electric shock.
and use common sense when
operating a power tool. Do not use a
power tool while you are tired or
under the influence of drugs, alcohol
or medication. A moment of inattention
while operating power tools may result
in serious personal injury.
equipment. Always wear eye
protection. Protective equipment
such as dust mask, non-skid safety
shoes, hard hat, or hearing protection
used for appropriate conditions will
reduce personal injuries.
Ensure the switch is in the
off-position before connecting to
power source and/or battery pack,
picking up or carrying the tool.
Carrying power tools with your finger on
the switch or energising power tools that
have the switch on invites accidents.
wrench before turning the power
tool on. A wrench or a key left