Sauder Library 158085 Instrucciones De Montaje página 25

6
TOP (C)
These surfaces
should be even.
BLACK 1- -7/8" PAN HEAD SCREW
(3 used in this step)
- Fasten the LEFT END (B) to the TOP (C), SHELF (D), and BOTTOM (E). Tighten the TWIST-LOCK
FASTENERS in the LEFT END, SHELF, and BOTTOM.
- Fasten the TOP MOLDING (J) to the TOP (C) as shown. Use three BLACK 1- -7/8" PAN HEAD SCREWS through
the TOP MOLDING and into the pre- -drilled holes in the TOP.
- Lock the SHELF MOLDING (K) to the SHELF (D). With the CAM SCREWS inserted into the HIDDEN CAMS,
turn the HIDDEN CAMS about 1/2 turn clockwise with your screwdriver.
NOTE: Be sure the indicated surfaces are even.
NOTE: If the CAM SCREWS will not insert completely into the holes, be sure the arrows in the top of
the HIDDEN CAMS are facing toward the CAM SCREWS.
All manuals and user guides at all-guides.com
TOP (C)
TOP
MOLDING (J)
SHELF (D)
www.sauder.com/services
SHELF (D)
LEFT
END (B)
SHELF
MOLDING (K)
BOTTOM (E)
R
158085