End; (O) Twist-Lockr; Fastener - Sauder Library 158085 Instrucciones De Montaje

2
R
TWIST-LOCK
FASTENER (V)
Read each step through completely before beginning the step. This box "-" is provided as a check- -off box. As you
complete each task, check it off. Assemble your unit on a carpeted floor or on the empty carton to avoid scratching
the finished surfaces.
- To begin assembly, push a SAUDER TWIST-LOCK
and LEFT END (B). Repeat this step for the SHELF (D) and BOTTOM (E).
NOTE: Be sure the TWIST-LOCK
Make sure the point is positioned as shown in the enlarged diagram. Do not tighten the
TWIST-LOCK
NOTE: If you need to remove a TWIST-LOCK
of the hole. Pull at the front and back edges, slowly working the FASTENER out of the hole.
All manuals and user guides at all-guides.com
R FASTENERS are positioned as shown in the enlarged diagrams.
R FASTENERS at this time.
www.sauder.com/services
Dowel end
LEFT
END (B)
RIGHT
END (A)
R
FASTENER (V) into the large holes in the RIGHT END (A)
R FASTENER from a hole, pull the FASTENER back out
Make sure this point
is in this location.
158085